Because the accumulated wastes have almost penetrated the inner lumen of the pipes in a clogged drainage system, the water you use to take a bath cannot travel through the hole. It is incredibly challenging for water to move through the confined space because of the tangled hair and all the other crude-like chemical substances that have clung to the sides of the pipes. Things like hair, toothpaste, shaving cream, whiskers, and soap scum can go down bathroom sinks and clog the drains. The draining of these items therefore becomes difficult or even impossible. E Industrial Engineering is suggesting to maintain your bathroom drains clear and flowing.
- Pour some simple, hot water into the drain
- You must perform this once a week for about 30 seconds. This helps to make sure the drain is clear before a blockage could develop.
- Use vinegar and table salt.
- One spoonful of table salt can be poured down the drain. After that, add 1/4 cup of pure white vinegar to it. Run hot water down your drain to remove the salt after an hour has passed.
- Employ liquid bleach.
- You can flush your drain with a half-cup of liquid bleach. Regularly carrying out this action will keep the drain open.
- Use a solution of vinegar and baking soda.
- Half a cup of baking soda should be poured down your drain. After that, add a half cup of vinegar to it. Baking soda is basic and vinegar is acidic; therefore, mixing the two will create foaming action that will remove drain clog and have it flushed away.
- Sink a Drain
- This is a typical technique for unclogging drains. When it comes to bathroom drains, you must make sure that the overflow hole in the sink is closed or sealed before you plunge. Put two to three inches of water in the sink, then set the plunger directly over the drain. It should be quickly lowered and raised multiple times. You can anticipate the water to drain away as soon as you remove the plunger. When the water is not draining away, try the plunging procedure once more.
- Make use of a drain auger.
- When plunging your drain doesn’t clear it, this is your next course of action. A drain auger is made of coils of metal that end in a tiny metal hook. The gadget needs to be put through the drain pipe of your sink while being turned while it does so. This tool should be firm enough to open a pipe blockage and force it through, or it should be strong enough to use the hook attached to the end to grab any obstructions. Run hot water down your drain if you’ve already cleared the obstruction because it can wash anything that might be sticking to the sides of your drainpipes.
Consider installing a heavy-duty macerator pump to grind drain waste into a slurry and facilitate better drainage. These bathroom fixtures are best for new bathroom additions. With them, you won’t have to excavate to connect your shower, sink, tub, and toilet drains to your septic tank. If your toilet is due for an upgrade soon, you can opt for a SaniCompact macerating toilet instead to save on the cost and hassle of installing a new toilet.
Therefore, keeping the drain cover clean on a regular basis is still highly beneficial. Remove everything that was stuck to its surface. If ignored, a clogged bathroom drain could actually result in a host of serious issues, including increased financial strain and emotional misery. It’s crucial to locate the source of the issue before trying to clear your drainage system. Take out any materials that might have gotten stuck through the holes. If it doesn’t work, you can try a variety of tools that could restore your drainage system’s functionality.